Our products

Wing Systems

Just a few of this season's star products:

Technical Cordless Wing

The TCW cordless wing format offers enhanced dump control, greater streamlining and reduced servicing and may be upgraded from a single to twin bladder system. Includes integral D-Ring for redundant inflate or lightweight accessory stowage. Wing (Bladder Assembly) 330 N (76 lbs) buoyancy capability per bladder. The TCW is a low profile wing system with pull down remote exhaust valve and an elasticated cordless side panel for controlled, even deflation. The back panel of the wing has webbing slots for single and twin tank mounting and back plate height adjustment holes. The backplate is available in stainless steel or aluminium and is multi-holed to allow any configuration. The technical harness is one size, fully adjustable with adjustable D-Rings & Billy rings. The harness is fully adjustable from both shoulders with single or dual shoulder break points.
All units are delivered fully assembled and complete with shoulder covers, hose wrap sleeves, accessory pouch, Billy ring, crotch strap/scooter ring. 

 

Harness

At the heart of any good load carrying system must be a well designed harness. It should be strong, durable, simple but at the same time should be comfortable, flexible and easily adjustable. The TCW's harness meets all these requirements. The harness crosses over behind the neck to maximise security of fitment and minimise “cylinder roll”, providing optimum balance and control. If preferred the harness can be threaded so it is uncrossed and just fits over the both shoulders.

The Harness features:

Shoulder covers: These neoprene coverings have one main function and an added bonus. Their main function is to provide additional stowage space for small items such as back up torches, line arrows etc. The bonus function is that they provide additional comfort. 
Shoulder clips: The shoulder clip configuration is designed to allow full adjustability for both shoulders. You can thread the harness and have a one-side-only break point. If preferred you can thread  the break point to lock or unlock on either shoulder, giving full flexibility.
D-Rings: The harnesses are equipped with six D-rings and with two Billy rings on the waist strap. 
Bump/Accessories Bag: The bump bag is made from a strong cordura material which gives excellent durability even after numerous sea water immersions. It has two pockets, one at the front and one at the rear. These allow stowage space for items such as compass, slate, spare bolt snap, drop spool etc. It is fastened to the jacket with two reinforced webbing loops which thread on to the 2" webbing waist strap.
Belt Buckle: Made from solid marine grade 316 stainless steel. A secure and positive action ensures a long life and reliable use.
Neoprene Stowage: This handy storage area is a tube of neoprene placed over the waist belt. It is ideal for storing backup instrumentation and other small items.
Crotch Strap: The crotch strap is made from one inch wide webbing preventing the rig slipping down towards the divers head if inverted and includes a scooter attachment ring.

 

Backplates

 

The backplate is available in two sizes, standard and extended. The extended size is designed for heights of 6' 3" (190cm) and above. Available as standard in marine grade stainless steel  or to order in hard anodised aluminium; plates are 3mm thick. 
 
Standard Plates H40 x W30 cm
S/Steel 2.3 Kgs 5.1 Lbs
Aluminium 0.75 Kgs 1.7 Lbs
     
Extended Plates H45 x W30 cm
S/Steel 2.6 Kgs 5.6 Lbs
Aluminium 0.85 Kgs 1.9 Lbs

Backplate features:

Harness Slots: 2" webbing slots for threading of harness.
Stowage Eyelets: Ideal mounting points for torch batteries and argon bottles. Large diameter for easy removal and attachment.
Twin-Set Mounting Holes: Holes for the mounting of twin-sets with tank bands. Industry standard 11" separation holes to match standard banded and bolted twin-sets.
Cam Band Slots: A variety of slots for 2" webbing cam bands to mount almost any configuration in any manner. Ideal for the travelling diver.
Crotch Strap Mounting Slot: 1" and 2" mounting points for a crotch strap, which helps keep the wing secure in the event of the diver being in an inverted position.

SYSTEM  FEATURES

*  Cordless wing format offering enhanced dump control,
    greater streamlining and reduced servicing.

*  One size, fully adjustable harness.
*  Single or twin bladder systems available. 
*  Wing (Bladder Assembly) 330 N - 76lbs  buoyancy 
    capability per bladder.

*  Stainless steel  or Aluminium back plate,
    multi-holed 
to allow any configuration. 
*  Low profile wing system.
*  Pull down remote exhaust valve.
*  Elasticated and cordless side panel for controlled, 
    even deflation.

*  Adjustable D-Rings & Billy rings. 
*  Harness fully adjustable from both shoulders.
*  Webbing slots for single / twin tank mounting.
*  Back plate height adjustment holes. 
*  Upgradeable single to twin system.
*  Crutch strap and scooter ring. 
*  Single shoulder break point.
*  Integral D-Ring for redundant inflate, or 
    lightweight accessory stowage.|

*  Six integral D-Rings for accessory stowage.
*  Complete systems are supplied dressed with 
    inflator hose wrap, harness shoulder pads, 
    accessory pouch, 1"crutch strap  
    and scooter ring.

 

 

Technical Diving Buoyancy 
 

These wings systems are the product of two years detailed design evolution in consultation with users including the leading names in the technical diving field. The objection being the development of a unique system, offering a dramatic improvement on previous designs. The basic elements of the system are a single or twin bladder wing unit (300N/66lbs lift per bladder).  A lattice of durable long life silicone bungee cord runs around the centre of the wing giving the user the most streamlined profile possible, and also aids in the deflation of the wing. The TDB is a low profile wing system with pull down remote exhaust valve. 
The back panel of the wing has webbing slots for single and twin tank mounting and back plate height adjustment holes. The backplate is available in stainless steel or aluminium and is multi-holed to allow any configuration.
The technical harness is one size, fully adjustable with adjustable D-Rings & Billy rings. The harness is fully adjustable from both shoulders with single or dual shoulder break points.
All units are delivered fully assembled and complete with shoulder covers, hose wrap sleeves, accessory pouch, Billy ring, crotch strap/scooter ring. 


Harness

 

At the heart of any good load carrying system must be a well designed harness. It should be strong, durable, simple but at the same time should be comfortable, flexible and easily adjustable. The TDB's harness meets all these requirements. The harness crosses over behind the neck to maximise security of fitment and minimise “cylinder roll”, providing optimum balance and control. If preferred the harness can be threaded so it is uncrossed and just fits over the both shoulders.

Harness features:

Shoulder covers: These neoprene coverings have one main function and an added bonus. Their main function is to provide additional stowage space for small items such as back up torches, line arrows etc. The bonus function is that they provide additional comfort. 
Shoulder clips: The shoulder clip configuration is designed to allow full adjustability for both shoulders. You can thread the harness and have a one-side-only break point. If preferred you can thread the break point to lock or unlock on either shoulder, giving full flexibility.
D-Rings: The harnesses are equipped with six D-rings and two Billy rings on the waist strap.
Bump/Accessories bag: The bump bag is made from a strong cordura material which gives excellent durability even after numerous sea water immersions. It has two pockets, one at the front and one at the rear. These allow stowage space for items such as compass, slate, spare bolt snap, drop spool etc. It is fastened to the jacket with two reinforced webbing loops which thread on to the 2" webbing waist strap.
Belt Buckle: Made from solid marine grade 316 stainless steel. A secure and positive action ensures a long life and reliable use.
Neoprene Stowage: This handy storage area is a tube of neoprene placed over the waist belt. It is ideal for storing backup instrumentation and other small items.
Crotch Strap: The crotch strap is made from one inch wide webbing preventing the rig slipping down towards the divers head if inverted and includes a scooter attachment ring.

 

Backplates

 

The backplate is available in two sizes, standard and extended. The extended size is designed for heights of 6' 3" (190cm) and above. Available as standard in marine grade stainless steel  or to order in hard anodised aluminium; plates are 3mm thick. 
 
Standard Plates H40 x W30 cm
S/Steel 2.3 Kgs 5.1 Lbs
Aluminium 0.75 Kgs 1.7 Lbs
     
Extended Plates H45 x W30 cm
S/Steel 2.6 Kgs 5.6 Lbs
Aluminium 0.85 Kgs 1.9 Lbs

Backplate features:

Harness Slots: 2" webbing slots for threading of harness.
Stowage Eyelets: Ideal mounting points for torch batteries and argon bottles. Large diameter for easy removal and attachment.
Twin-Set Mounting Holes: Holes for the mounting of twin-sets with tank bands. Industry standard 11" separation holes to match standard banded and bolted twin-sets.
Cam Band Slots: A variety of slots for 2" webbing cam bands to mount almost any configuration in any manner. Ideal for the travelling diver.
Crotch Strap Mounting Slot: 1" and 2" mounting points for a crotch strap, which helps keep the wing secure in the event of the diver being in an inverted position.

SYSTEM  FEATURES
 

*   Silicon cord threading on wing to allow controlled
     inflation & deflation.
 
*   One size, fully adjustable harness.
*   Single or twin bladder systems available. 
*   Wing (Bladder Assembly) 300 N - 66lbs buoyancy
     capability per bladder.

*   Stainless steel or Aluminium back plate,
     multi-holed 
to allow any configuration. 

*   Low profile wing system.
*   Pull down remote exhaust valve.
*   Adjustable D-Rings & Billy rings. 
*   Harness fully adjustable from both shoulders.
*   Webbing slots for single / twin tank mounting.
*   Back plate height adjustment holes. 
*   Upgradeable single to twin system.
*   Crutch strap and scooter ring. 
*   Single shoulder break point.
*   Integral D-Ring for redundant inflate, or lightweight
     accessory stowage.

*   Six integral D-Rings for accessory stowage.
*   Complete systems are supplied dressed with
     inflator hose wrap, harness shoulder pads, 
     accessory pouch, billy rings, 1"crutch
     strap and scooter ring.

 

Print Print | Sitemap

©Copyright 2012 Amphibian Sports Ltd. All Rights Reserved.

Call

E-mail

Directions